Showing 1–16 of 21 results
High quality replacement 6805 2RS LLU sealed bearing, ABEC 3. Dimensions: 25 x 37 x 7mm.
NTN is one of the largest bearing producers in Japan and was founded in 1918.
High quality replacement 6903 2RS LLU sealed bearing, ABEC 3. Dimensions: 17 x 30 x 7mm.
Rapidé Ultralight PRO QR Front Hub Axle Adapters allow Rapidé Ultralight PRO 100 Disc 2018 front hubs to work with QR axles as used on many Road, Gravel and MTB bike front wheels.
Rapidé Ultralight PRO QR Rear Hub Axle Adapters allow Rapidé Ultralight PRO 2018 135/142 Disc rear hubs to work with QR axles as used on many MTB, Gravel and Road bike rear wheels.
Rapidé Ultralight PRO Torque Caps Thru Axle Adapters allow Rapidé Ultralight PRO 100 Disc and PRO 110 Boost front hubs to take advantage of the extra stiffness created by the Torque Caps interface on many Rockshox 15mm thru axle forks introduced since 2016.
Torque Caps provide performance benefits through additional stiffness in the fork-hub interface by making the bond between hub and fork dropout stronger, with an increased surface area connecting the two – 31mm diameter vs 21mm on a standard 15mm thru axle adapter. This creates a stronger, stiffer interface, giving you a more responsive front wheel and more control.
Check SRAM’S listing of forks with Torque Caps compatibility here:
Rapidé Ultralight PRO 15 Thru Axle Adapters allow Rapidé Ultralight PRO 100 2018/2019/2020 Disc front hubs to work with 15mm thru axles.
Rapidé Ultralight PRO 12mm Rear Hub Thru Axle Adapters allow Rapidé 2018/2019 Ultralight PRO 135/142 and 2018/2019 Ultralight PRO Boost 148 Disc rear hubs to work with 12mm thru axles as used on many disc brake equipped MTB, Gravel and Road bike rear wheels.
Rapidé XBA 57 Front Hub Boost Adapters convert any 100mm x 15mm thru axle front hub to Boost 110mm spacing.
Rapidé XBA 58 Rear Hub Boost Adapters convert any 142mm x 12mm thru axle rear hub to Boost 148mm spacing.
Rapidé MXL142 Bolt Up Thru Axle for the Rapidé Tigre frame. Use when fitting a 142 x 12 rear hub to the Tigre. Also suitable for frames using the 142 x 12 hub size and M12 x p1.75 thread type (SRAM® Maxle®) for the thru axle.
Note: check your frame dimensions for compatibility, there are many variations of thru axle.
AL 7050-T6 Heat Treated Alloy
142 x 12mm hub size
M12 x p1.75 thread type (SRAM® Maxle®)
Lightweight bolt up design
The Rapide QR-114 Quick Release Front Skewer has a light and strong AL6061 lever and 1045 steel shaft for maximum hold. Length 114mm
Replacement cassette body for Rapidé Ultralight PRO 2018/2019 Disc hubs. Compatible with Shimano® Micro Spline pattern 12 speed cassettes including XTR CS-M9100-12, Deore XT CS-M8100-12 and SLX CS-M7100-12.
Micro Spline delivers a lightweight aluminum freehub body to reduce weight and allow a 10 tooth top gear. The lightweight aluminum Micro Spline Freehub seamlessly integrates with small 10-tooth top gears. Smaller and more widely distributed splines limit cog damage on the lightweight aluminum freehub.
Four large steel pawls and individual springs for quick engagement (10°) and rugged power transfer.
Only compatible with Rapidé Ultralight PRO 2018/2019/2020 hubs.
Compatible with Shimano 12 speed Micro Spline cassettes
For Rapidé Ultralight PRO 2018/2019/2020 MTB hubs
Light and strong 7075 alloy construction
Quality Enduro sealed bearings
Four oversized steel pawls for rugged power transfer
Rapidé MXL148 Bolt-Up Thru Axle for the Rapidé Tigre frame. Use when fitting a 148 x 12 (boost) rear hub to the Tigre. Also suitable for frames using the 148 x 12 hub size and M12 x p1.75 thread type (SRAM® Maxle®) for the thru axle.
Note: Check your frame dimensions for compatibility, there are many variations of thru axle.
148 x 12mm (Boost) hub size
Replacement cassette body for Rapidé Ultralight PRO 2018/2019/2020 Disc hubs. Takes 9, 10, 11 & 12 speed MTB and 9, 10 & 11 speed road Shimano® pattern cassettes (adapter included).